top of page
  • an all-tube turntable preamplifier for both MM and MC phono cartridges
  • nine tubes, one vacuum tube out of them used to rectify anode voltage
  • wiring circuitry without any global feedback
  • PCB`s utilize our premium CMT ™ technology
  • absolute selection and tubes matching with above-average parameters
  • vacuum-impregnated transformer core
  • transformer potted in a special anti-vibration compound
  • we only use high-quality polypropylene capacitors in the signal path
  • if a turntable is fitted with two tonearms, one having MM phono cartridge installed and the other MC, both can be connected simultaneously without mutually affecting each other
  • hight variability of gain settings, resistances and capacitances settings for all types of phono cartridges
  • a high-quality step-up Lundahl transformer for MC phono cartridges

Canor phono amplifier PH 1.10

  • MM 50,150,270,370,520,620,740 a 840 pF / Gain: 46dB
    MC1 10,20,40,80,150,300,600 a 1200 Ohm / Gain: 70dB
    MC2 2,5,10,20,40,80,150 a 300 Ohm / Gain: 76dB
    Output Impedance 100 Ohm
    Inputs RCA – MM  /  RCA – MC
    Outputs RCA / XLR
    Total Harmonic Distortion MM/MC <0,1%/1VRMS
    Subsonic Filter 18dB/Octave
    RIAA accuracy 0,3dB/20Hz – 20kHz
    Signal-To-Noise ratio MM 72dBV (87dBV – IEC -A)
    Signal-To-Noise ratio MC 68dBV (82dBV – IEC -A)
    Tube Complement 8x 6922EH , 1x 6CA4EH
    Power 230 V / 50 Hz / 70 VA
    Dimensions (W x H x D) 435  x 170 x 485 mm
    Weight (net) 17 kg
bottom of page